Turnbuckle

HOME > Products > Rigging Hardware > Turnbuckle

US Type Drop Forged Turnbuckle Jaw & Jaw Type

Jaw & Jaw turnbuckles feature a jaw end fitting on both ends. Jaws, the most highly stressed part of the assembly, endure quenched and tempered process to provide consistent performance for critical applications. These turnbuckles are available in sizes ranging from 1/4″ to 2-3/4″ to fit every project.

GET A QUOTE

Description

Product Features:

Meets the design requirements of US Federal Specifications.

End fittings are Quenched and Tempered, bodies heat treated by normalizing.

Jaws are forged with a greater cross sectional area that results in a stronger jaw with better fatigue properties.

Turnbuckles recommended for straight or in-line pulls only.

Proof tested to 2 x WLL and Minimum Break Force is 5 x WLL.

Certified for Lifting.

US Type Drop Forged Turnbuckle Jaw & Jaw Type

Specifications

ITEM NO R-LIFTING CODE	Thread Dia.& Take Up (in.)	Working Load Limit (lbs.)	Weight Each (lbs.)	Dimensions (in.)
ITEM NO R-LIFTING CODE	Thread Dia.& Take Up (in.)	Working Load Limit (lbs.)	Weight Each (lbs.)	A	B	E Closed	G	J Open	K Closed	M Open	N Closed	B
RL-UDFT435	1/4X4	500	0.37	0.25	0.45	1.66	0.64	11.19	7.19	12.28	8.18	4.07
RL-UDFT436	5/16X4-1/2	800	0.56	0.31	0.50	2.02	0.87	13.07	8.57	14.12	9.62	4.58
RL-UDFT437	3/8X6	1200	0.85	0.38	0.53	2.11	0.85	16.25	10.25	17.50	11.50	6.10
RL-UDFT438	1/2X6	2200	1.82	0.50	0.64	3.22	1.07	18.65	12.65	20.14	14.14	6.03
RL-UDFT439	1/2X9	2200	2.29	0.50	0.64	3.20	1.07	25.94	15.94	26.43	17.43	9.36
RL-UDFT440	1/2X12	2200	2.71	0.50	0.64	3.20	1.07	30.94	18.94	32.43	20.43	12.36
RL-UDFT441	5/8X6	3500	3.21	0.63	0.79	3.90	1.32	19.74	13.74	21.82	15.82	6.03
RL-UDFT442	5/8X9	3500	3.95	0.63	0.79	3.89	1.32	26.08	17.08	28.16	19.16	9.39
RL-UDFT443	5/8X12	3500	4.58	0.63	0.79	3.89	1.32	32.08	20.08	34.16	22.16	12.39
RL-UDFT444	3/4X6	5200	4.80	0.75	0.97	4.71	1.52	21.09	15.09	23.68	17.68	6.13
RL-UDFT445	3/4X9	5200	5.85	0.75	0.97	4.68	1.52	27.49	18.49	30.08	21.08	9.59
RL-UDFT446	3/4X12	5200	6.72	0.75	0.97	4.68	1.52	33.49	21.47	36.08	24.08	12.59
RL-UDFT447	3/4X18	5200	8.45	0.75	0.97	4.71	1.52	45.49	27.49	48.08	30.08	18.53
RL-UDFT448	7/8X12	7200	9.37	0.88	1.16	5.50	1.77	34.65	22.65	37.62	25.62	12.16
RL-UDFT449	7/8X18	7200	11.8	0.88	1.16	5.50	1.77	47.12	29.12	50.09	32.09	18.63
RL-UDFT450	1X6	10000	10.4	1.00	1.34	6.09	2.05	23.82	17.82	27.18	21.18	6.18
RL-UDFT451	1X12	10000	13.8	1.00	1.34	6.09	2.05	35.82	23.82	39.18	27.18	12.18
RL-UDFT452	1X18	10000	17.1	1.00	1.34	6.09	2.05	47.82	29.82	51.18	33.18	18.18
RL-UDFT453	1X24	10000	21.0	1.00	1.34	6.06	2.05	60.42	36.42	63.78	39.78	24.84
RL-UDFT454	1-1/4X12	15200	21.9	1.25	1.84	8.09	2.82	39.37	27.37	43.58	31.58	12.06
RL-UDFT455	1-1/4X18	15200	25.9	1.25	1.84	8.09	2.82	51.37	33.37	55.58	37.58	18.06
RL-UDFT456	1-1/4X24	15200	29.8	1.25	1.84	8.09	2.82	63.93	39.93	68.14	44.14	24.62
RL-UDFT457	1-1/2X12	21400	32.6	1.50	2.06	8.93	2.81	40.76	28.76	45.68	33.68	12.32
RL-UDFT458	1-1/2X18	21400	38.0	1.50	2.06	8.93	2.81	52.76	34.76	57.68	39.68	18.32
RL-UDFT459	1-1/2X24	21400	43.5	1.50	2.06	8.93	2.81	65.38	41.38	70.30	46.30	24.94
RL-UDFT460	1-3/4X18	28000	53.5	1.75	2.60	9.36	3.35	53.35	35.35	59.16	41.16	18.37
RL-UDFT461	1-3/4X24	28000	61.1	1.75	2.60	9.36	3.35	65.35	41.35	71.16	47.16	24.37
RL-UDFT462	2X24	37000	96.3	2.00	2.62	11.80	3.74	69.64	45.64	76.72	52.72	24.48
RL-UDFT463	2-1/2X24	60000	167	2.50	3.06	13.26	4.44	72.97	48.97	82.16	58.18	24.60
RL-UDFT464	2-3/4X24	75000	199	2.75	3.69	14.92	4.19	74.75	50.75	85.50	61.50	24.65